Safety Instructions These instructions are intended to assist users with the operation of the GXV3601 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
The GXV3601 is a next generation IP camera for remote monitoring and surveillance over your LAN or internet. The GXV3601 combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.264 video streams with up to 30 frames per second in full D1, delivering rich image clarity at rapid transmission rates.
Package Contents Items in the package: • GXV3601 IP Camera • 12V DC power Adapter • 6-pin terminal block connector – 6-pin connector block for connecting external devices, such as infrared detector, smoke detector and etc., to Alarm IN, Alarm OUT and RS485 pins.
Product Overview GXV3601 Overview 1: GXV3601 P ABLE RODUCT ODELS Model GXV3601-N xxx-xx004-xxx xxx-xx009-xxx GXV3601-HD GXV3601-LL xxx-xx0011-xxx GXV3601 Side View- (This is only applicable on GXV3601-N) Firmware 1.0.4.6 Grandstream Networks, Inc. 09/2010 GXV3601 IP Camera Page 6 of 36...
GXV3601 IP Camera GXV3601_LL and GXV3601_HD have no DC driver IRIS GXV3601 Back Panel Indicators and Connectors on Back Panel NETWORK – 10/100 Switch LAN port for connecting to Ethernet. The indicator will be steady for connection and flashing for network activity.
POWER – The indicator will be solid green if the power is on. GXV3601 Sample Connection Diagram GXV3601 Key Features The table below lists the key features the GXV3601 Supports. Features GXV3601-N 1/3” Sony Supper HAD Image Sensor 1/3” Varifocal 3.5-8mm,...
Page 9
Temperature / 0°C – 45°C(32°F–133°F) Humidity Humidity 10–90% RH (non–condensing) Power Firmware 1.0.4.6 Grandstream Networks, Inc. 09/2010 20fps for 1,600x900, 30fps for 1,280 x 720, 30fps for 800x450, 640x360, 480x270, 320x180 and 240x135 32 Kbps – 4 Mbps, adjustable (8 Mbps maximum) 3.5mm LINE IN...
2.05 x 2.05 in) Length 1 x Length Weight 95 g (3.35 oz) Operation Focus (w/lock) Zoom (w/lock) Figure1: Lens Specifications for GXV3601-HD and GXV3601-LL Firmware 1.0.4.6 Grandstream Networks, Inc. 09/2010 GXV3601 IP Camera GXV3601-LL GXV3601-HD 1/3” 1/3” Mega Variable focus, 3.5 to...
= 4 mm, f = 6 mm, or f = 8 mm f = 3 to 8 mm; f = 5 to 55 mm F = 1.2, F = 1.6 F1.2 ~ C GXV3601 has DC-IRIS driver circuit and DC Automatic Aperture lens can be used to 90 > 90...
Connect the other end of the RJ-45 cable to your network or PC. • Connect the power supply to the DC 12V power jack on the back of the GXV3601. • Connect the other end of the power supply to a wall outlet. The POWER LED will turn solid green.
Configuring the GXV3601 via Web Browser The GXV3601’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. ccess onfiguration GXV3601 W Connect the Camera to DHCP server.
If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3601. 2. Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure the subnet mask to 255.255.255.0.
GXV3601 IP Camera GXV3601 Home Web Page Figure2: Home web page of GXV3601-N and GXV3601-LL Figure3: Home web page of GXV3601-HD Firmware 1.0.4.6 Page 15 of 36 Grandstream Networks, Inc. 09/2010...
Configures the Save Location for captured images and Config recorded videos. GXV3601 System Page This page allows you to configure the system settings on GXV3601. Current System Time - displays the current date and time (24h clock). Set the System Time...
On Screen Display (OSD) Settings OSD Time/ Text – The time stamp and channel name displayed on the screen. Video Settings Preferred Video Codec – The GXV3601 supports the H.264 video codec. Firmware 1.0.4.6 Page 17 of 36 Grandstream Networks, Inc. 09/2010...
Audio Settings Preferred Audio Codec – The GXV3601 supports up to 3 different Vocoder types, a-law (PCMA), u-law (PCMU) and G.726. The audio can also be turned off by switching the setting to “Disabled”...
GXV3601 supports IP version 4. The IP address can set automatically via DHCP, or a static IP address can be set manually. To make GXV3601 work properly, the user needs to set the DNS configuration properly. For security purposes, the user can also assign the GXV3601 an HTTP Port other than 80.
554. If the HTTP Port is changed, when you add this device to GSurf or GS_NVR, please make sure the RTSP port number equals HTTP Port plus 2000. – GXV3601 supports WIFI via wireless dongles. GXV3601 Wifi Page Enable Wifi –...
GXV3601 SIP Page The GXV3601 has the ability to receive phone calls and make phone calls when an alarm event is triggered through motion detection or alarm input. Register the GXV3601 to a SIP server to enable the product to make and receive phone calls. To make outgoing phone calls out, the user needs to configure the Phone List properly.
Page 22
Configure Phone List Page To make sure the GXV3601 can make phone calls to the number you preferred when alarm is triggered. You need to add number to the phone list. Steps to add phone number: 1.
DDNS Status – This field shows the status of DDNS. Camera Type This section shows the Lens information of GXV3601. The Lens type information contains the brand name, the size of image sensor, the resolution and so on. Firmware 1.0.4.6 Page 23 of 36 Grandstream Networks, Inc.
Allow Anonymous Login – If ‘Allow Anonymous Login’ is set to Yes, no user name and password are required to login to the GXV3601 web configuration pages. If you login anonymously, you will not be able to change any settings.
Upgrades are supported via TFTP, HTTP and HTTPS. 3. Log in to the Maintenance page of the GXV3601. Select the server type from the dropdown list under the “Upgrade Via” field. Enter your server’s root directory in the “Firmware Server Path” field.
SMTP settings are ready to go. GXV3601 FTP Page The FTP server is used to store video files if you configure the GXV3601 to record video and upload it to the FTP server when an alarm event or motion detection is triggered.
Baudrate according to your connected PTZ device. 3. Click Save and reboot the device to apply all changes. 4. Use those PTZ buttons on the homepage to tilt, pan the GXV3601 and also adjust the speed. GXV3601 itself does not support PTZ. The users can connect a PTZ device to the NOTE: GXV3601 via RS485 pins to pan, tilt and speed.
Page 28
Set up Alarm Actions An alarm action is what the GXV3601 is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3601 allows multiple alarm actions. Record Video – If this option is selected, the GXV3601 will record the video when an alarm is triggered.
Page 29
Video and configure the FTP page properly to use this feature. Email JPEG and Store it to USB drive or SD card – If this option is selected, the GXV3601 will capture the image and store it to connected live storage device when an alarm is triggered.
GXV3601 Motion Detection Page The GXV3601 supports Motion Detection. To utilize this feature, please follow the below steps: 1. Setup the motion detection monitored area. 2. Configure the motion detection time schedule. 3. Configure alarm action properly. Setup Motion Detection Monitored Area Enable Motion Detection –...
Page 31
3. Click Save to save the changes. Configure Motion Detection & Alarm Actions An alarm action is what the GXV3601 is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3601 allows multiple alarm actions.
Error. GXV3601 Live Storage This page displays detailed information of the live storage devices connected to the GXV3601 such as video and image files. You can view, download or delete the stored files. Storage Information – This section displays the type, capacity, used space, free space and...
IP VIDEO SURVEILLANCE 1. What is the default IP address of GXV3601/3501/3504? Prior to firmware version 1.0.3.9, the IP address of GXV3501/ 3504/ 3601/ 3611 is 192.168.1.168 at the factory default settings. You can perform a factory reset by pressing the RESET button on the device for 7 seconds.
Page 34
Please double check whether the device has an audio input connected. The GXV3504 has 4 audio input ports and one MIC IN port. The GXV3501 has a MIC IN port for an audio input. The GXV3601 has a built-in microphone and one MIC IN port for audio inputs.
Page 35
If the web port is 80, then the RTSP port is 554. If the web port is not 80, then the RTSP port equals the web port +2000. For example, if the web port is 88, then the RTSP port will be 2088. Firmware 1.0.4.6 Grandstream Networks, Inc. 09/2010 GXV3601 IP Camera Page 35 of 36...
Page 36
Mobile Intel® 945GM Express Chipset Family Mobile intel® 915GM/GMS, 910GML Express Chipset Family Intel® G45/G43 Express Chipset ATI Technologies, RAGE XL PCI Firmware 1.0.4.6 Grandstream Networks, Inc. 09/2010 GXV3601 IP Camera Test Result Works normally Works normally Works normally Works normally...