Grandstream Networks GXV3662 User Manual
  1. Manuals
  2. Brands
  3. Grandstream Networks Manuals
  4. IP Camera
  5. GXV3662 series
  6. User manual

Grandstream Networks GXV3662 User Manual

Grandstream networks home security system user manual
Hide thumbs Also See for GXV3662:
Table of Contents

Advertisement

Quick Links

Download this manual
Grandstream Networks, Inc.
GXV3662 User Manual

Advertisement

Table of Contents
loading

Related Manuals for Grandstream Networks GXV3662

Summary of Contents for Grandstream Networks GXV3662

  • Page 1 Grandstream Networks, Inc. GXV3662 User Manual...
  • Page 2 Safety Instructions These instructions are intended to assist users with the operation of the GXV3662 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
  • Page 3 GXV3662 IP Camera Note： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Page 4: Table Of Contents

    GXV3662 Home Web Page ... 15 GXV3662 System Time and Name Page ... 16 GXV-3662 Video & Audio Page ... 17 GXV3662 Networking Page – Assigning an IP to the GXV3662 ... 19 GXV3601 DDNS Page ... 20 GXV3662 SIP Page ... 21 GXV3662 Status Page ...

  • Page 5: Welcome

    The GXV3662 is a next generation IP camera for remote monitoring and surveillance over your LAN or internet. The GXV3662 combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.264 video streams with up to 30 frames per second at 720p resolution, delivering rich image clarity at rapid transmission rates.

  • Page 6: Package Contents

    Package Contents Items in the package:  GXV3662 IP Camera  12V DC power Adapter attached to terminal block  8-pin terminal block connector – 8-pin connector block for connecting external devices, such as infrared detector, smoke detector, emergency lights, etc., to Alarm IN and Alarm OUT.

  • Page 7: Product Overview

    GXV3662 IP Camera Product Overview GXV3662 Top View GXV3662 Side View GXV3662 Bottom View Firmware 1.0.1.22 Page 7 of 36 Grandstream Networks, Inc. 03/2011...

  • Page 8: Gxv3662 Inside Connections

    GXV3662 Inside connections Indicators and Connectors inside the camera Internal temperature regulator SD card slot Reset Firmware 1.0.1.22 Grandstream Networks, Inc. 03/2011 It adjusts the temperature to ensure the camera works normal under different weather. SD card slot. Press the Reset button for 6 seconds to perform a factory reset.
  • Page 9 Alarm/Audio Network Power Lens Firmware 1.0.1.22 Grandstream Networks, Inc. 03/2011 NOTE: GXV3662 does not support zoom Type Port AUDIO ALARM 10/100 Switch LAN port for connecting to Ethernet. The indicator will be steady for connection and flashing for network activity.

  • Page 10: Gxv3662 Sample Connection Diagram

    GXV3662 Sample Connection Diagram GXV3662 Key Features The table below lists the key features the GXV3662 Supports. Features GXV3662 1/3‖, 1.2 Megapixel CMOS, 1280H x 960V, day and night mode, Image Sensor exceptionally low noise levels and low light sensitivity. Shutter time: 1/30 to 1/1000 seconds 1/3‖, 3.3-12mm, F1.6-F3.2 (F1.4-F2.9), DC-Iris, Manual focus: 50cm - ∞,...

  • Page 11: Gxv3662 Lens Specification

    Humidity 10-90% RH(non-condensing) Output: 12VDC/1A; Input: 100–240VAC, 50–60Hz Power Adapter Vandal proof and weatherproof with IP66 standard Casing Compliance FCC, CE, C-tick, IP66 GXV3662 Lens Specification Parameters Lens Format Image Sensor 3.3mm – 12mm Focal Length Aperture Ratio View Angle D:125.7°- 29.9°...

  • Page 12: Minimum Recommended System Requirement

    Connect the other end of the RJ-45 cable to your network or PC.  Connect the power supply to the DC 12V connector block inside the GXV3662.  Connect the other end of the power supply to a wall outlet. The POWER LED will turn solid green.

  • Page 13: Configuring The Gxv3662 Via Web Browser

    Configuring the GXV3662 via Web Browser The GXV3662‘s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. ccess the GXV3662 W Connect the Camera to a DHCP server.

  • Page 14: Connect To The Camera Using A Static Ip

    If the camera does not get a response from the DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3662. 2. Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure the subnet mask to 255.255.255.0.

  • Page 15: Gxv3662 Home Web Page

    Alarm Event If an alarm event is triggered, the indicator will on the indicator to turn off the alarm. Control Console PTZ Console controller. PTZ is not supported in the GXV3662 ZOOM NOTE: The GXV3662 does not support zoom FOCUS Adjusts the focus of images.

  • Page 16: Gxv3662 System Time And Name Page

    Configures the Save Location for captured images and recorded videos. GXV3662 System Time and Name Page This page allows you to configure the system settings on the GXV3662. Current System Time - displays the current date and time (24h clock).

  • Page 17: Gxv-3662 Video & Audio Page

    GXV3662 IP Camera GSurf and GS_NVR to indentify the device when using GS_Search to search all the Grandstream network cameras or digital video cameras in the same subnet. GXV-3662 CMOS Settings Page Flip – Enable this option to flip the image 180 degrees Iris Setting –...
  • Page 18 Audio Settings Preferred Audio Codec – The GXV3662 supports up to 2 different Vocoder types, a-law (PCMA) and u-law (PCMU). The audio can also be turned off by switching the setting to ―Disabled‖...

  • Page 19: Gxv3662 Networking Page - Assigning An Ip To The Gxv3662

    – Assigning an IP to the GXV3662 GXV3662 Networking Page The GXV3662 supports IP version 4. The IP address can be set automatically via DHCP, or a static IP address can be set manually. To make the GXV3662 work properly, the user needs to set the DNS configuration properly.

  • Page 20: Gxv3601 Ddns Page

    Static IP addresses are recommended for the GXV3662 DNS Configuration There are two methods of DNS configuration on the GXV3662: 1. The GXV3662 can obtain the DNS server automatically 2. Users can configure their own...

  • Page 21: Gxv3662 Sip Page

    GXV3662 SIP Page The GXV3662 has the ability to receive phone calls and make phone calls when an alarm event is triggered through motion detection or alarm input. Register the GXV3662 to a SIP server to enable the device to make and receive phone calls. To make outgoing phone calls, the user needs to configure the Phone List properly.
  • Page 22 Click Save to save all the changes. You need to restart the device to apply all changes. Configure the Phone List Page To make sure the GXV3662 can make phone calls to the number you preferred when the alarm is triggered, you need to add a number to the phone list.

  • Page 23: Gxv3662 Status Page

    Network Status MAC Address – The device ID, in HEXADECIMAL format. LAN IP Address – This field shows the LAN IP address of the GXV3662. LAN Subnet Mask – This field shows the LAN subnet mask of the GXV3662. LAN Default Gateway – This field shows the LAN default gateway of the GXV3662.

  • Page 24: Gxv3662 User Management Page

    GXV3662 IP Camera This section shows the Lens information of GXV3662. The Lens type information contains the brand name, the size of image sensor, the resolution and so on. GXV3662 User Management Page All current users will be listed in the User List section of this page. You can also add and remove users here.

  • Page 25: Gxv3662 Smtp Page

    Upgrades are supported via TFTP, HTTP and HTTPS. 3. Log in to the Maintenance page of the GXV3662. Select the server type from the dropdown list under the ―Upgrade Via‖ field. Enter your server‘s root directory in the ―Firmware Server Path‖ field.

  • Page 26: Gxv3662 Ftp Page

    SMTP settings are ready to go. GXV3662 FTP Page The FTP server is used to store video files if you configure the GXV3662 to record video and upload it to the FTP server when an alarm event or motion detection is triggered.
  • Page 27 Internally, the Alarm-out uses relays as a switch (30VAC/2A); users can connect devices such as an alarm siren, alert lights or electric strike to this port. Under normal circumstances, the circuit is open. When there is an alarm event, the GXV3662 will close the circuit to trigger the alarm.
  • Page 28 Set up Alarm Event Time Schedule This section allows you to configure the time during which the GXV3662 will monitor the Alarm Input. The GXV3662 not only can monitor your settings but also can take actions when the alarm is triggered.

  • Page 29: Gxv3662 Motion Detection Page

    How to connect an Alarm Output Equipment to GXV3662 Here is a sample connection diagram. Connect the alarm output equipment to the GXV3662 by following the diagram below. GXV3662 Motion Detection Page The GXV3601 supports Motion Detection. To utilize this feature, please follow the steps below: 1.

  • Page 30: Configure Motion Detection & Alarm Actions

    3. Click Save to save the changes. Configure Motion Detection & Alarm Actions An alarm action is what the GXV3662 is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3662 allows multiple alarm actions.

  • Page 31: Gxv3662 System Log

    GXV3662 IP Camera Configure Motion Detection Time Schedule This section allows you to configure the time during which the GXV3662 will monitor the motion detection. The GXV3662 not only can monitor your settings but also can take actions when the alarm is triggered.

  • Page 32: Faq

    GXV3662 IP Camera GXV3662 Live Storage This page displays detailed information of the live storage devices connected to the GXV3662 such as video and image files. You can view, download or delete the stored files. Storage Information – This section displays the type, capacity, used space, free space and usage percentage of the connected SD card.
  • Page 33 8. Why is audio missing from the recorded video when an alarm is triggered? Please double check whether the device has an audio input connected. GXV3662 has a MIC IN port for an audio input. Firmware 1.0.1.22 Grandstream Networks, Inc. 03/2011...
  • Page 34 13. How can I use a cell phone to watch the GXV3662 video stream? You must set the video resolution to QCIF to watch the GXV3662 video stream from a cell phone. Make sure to set the bit rate to 64kbps to ensure the best video quality.
  • Page 35 17. Port forwarding Two ports must be forwarded on your router to watch video from a GXV3662 that is located on a private network from a PC in a public network. The web port (HTTP) and the RTSP port.
  • Page 36 Family Intel® G45/G43 Express Chipset ATI Technologies, RAGE XL PCI Firmware 1.0.1.22 Grandstream Networks, Inc. 03/2011 GXV3662 IP Camera Works normally This display adapter cannot display videos. Page 36 of 36...

Table of Contents