Gxv3662 Smtp Page - Grandstream Networks GXV3662 User Manual

address or domain name of the firmware server (the location of the firmware files).
Automatic Upgrade Interval – Enter the frequency (in minutes) in which the
HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration
changes.
Automatic Upgrade – The default setting is ―No.‖ Choose ―Yes‖ to enable automatic
HTTP/HTTPS/TFTP upgrade. When set to ―No‖, the IP Camera will only perform a
HTTP/HTTPS/TFTP upgrade and perform a configuration check once during the boot
process.
Performing a firmware upgrade:
1. Download the firmware package from http://www.grandstream.com/firmware.html.
2. Unzip the firmware package and copy the files to the firmware upgrade server
directory.
Upgrades are supported via TFTP, HTTP and HTTPS.
3. Log in to the Maintenance page of the GXV3662. Select the server type from the
dropdown list under the ―Upgrade Via‖ field. Enter your server's root directory in the
―Firmware Server Path‖ field.
4. Reboot the GXV3662 to begin the firmware upgrade process.

GXV3662 SMTP Page

The SMTP server is used to send out emails when an alarm event or motion detection is
triggered. The SMTP settings must be configured to make sure the alarm email is sent out
properly.
SMTP Server Settings
Enable SMTP – Checked to enable SMTP
SMTP Server – The IP or hostname of the
SMTP server, for example,
smtp.gmail.com.
SMTP Server Port – The port of the
SMTP server. The GXV3662 supports port
25 and SSL port 465, which is for SMTP
with an encrypted connection.
From E-Mail Address – The email
address that sends out the alarm email(s).
To E-Mail Address – The email
addresses that the alarm email(s) will be
sent to. You can have up to 3 emails
configured.
Firmware 1.0.1.22
Grandstream Networks, Inc. 03/2011
GXV3662 IP Camera
Page 25 of 36