Motion Detection Configuration Page (Set Alarm)
This page allows user to configure motion detection to trigger alarms:
Figure 16-1: Motion Detection Configuration Page
•
Enable Motion Detection:
•
Show Motion Detection Regions:
•
Select a Region:
•
Sensitivity:
Alarm Action:
•
Record Video From.....
•
Voice Alarm to SIP Phone:
•
Upload to Alarm Center:
Grandstream Networks, Inc.
When checked, Motion Detection enabled.
When checked, Motion Detection region with number will be
displayed in White Rectangle in the screen; when "Edit" clicked,
the Rectangle will become Red, as shown in Figure 16-1.
Pull down to select and configure alarm region, altogether 16
alarm region available, from 0 to 15.
Select configured alarm region number, input number for
sensitivity to trigger alarm, 100 is the maximum sensible value.
Allow user to select how long pre/after Alarm trigger moment, the
video be captured.
When checked, a SIP alarm phone call will be made to pre-
configured number.
When checked, the alarm video will be transferred to Alarm
Center, like Grandstream free GSurf_Pro VMS software.
GXV3615 User Manual
Firmware Version 1.0.4.38
Page 31 of 37
Last Updated: 03/2013