Smtp Setting Page (Email Alarm); Figure 12: Smtp Setting Page; Figure 13: Smtp Testing Page - Grandstream Networks GXV3615 User Manual

SMTP Setting Page (Email Alarm)

This page allows user to configure email client to send out email when alarm trigged:

Figure 12: SMTP Setting Page

•
Enable SMTP:
•
SMTP Server:
•
SMTP Server Port:
•
From Email address:
•
To E-Mail address:
•
User Name:
•
Password:
•
SSL:
NOTE:
 Click "Save" to save the email configuration information.
 Click "Test" after configuration, if setting is correct, a test email will send out and "Test
successful!" yellow bar will display like below

Figure 13: SMTP Testing Page

Grandstream Networks, Inc.
When checked, email client is enabled.
SMTP Email Server IP or Domain Name
Port number used by server to send email
The email address of alarm email sending from, usually client email ID
The email address to receive the alarmed email, total 3 included.
Email client User ID
Email client password
Check if the SMTP email server requires SSL
GXV3615 User Manual
Firmware Version 1.0.4.38
Page 28 of 37
Last Updated: 03/2013