Menu Selections - Brady LabXpert User Manual

Menu Selections

To perform types of formatting, press [MENU] and the corresponding softkey. Following is a list
of the high-level menu selections and the corresponding softkeys:
Menu Selection
Vial – Choose from available sizes of .6 ml, 1.5 ml, 1.8 ml, 2-4 ml.
15 ml, and 50 ml, and AUTO.
Note: To clear a previously set vial size, select AUTO from the Vial
menu.
Continuous – Choose AUTO for label length that is determined by
font size and characters entered, LEN (length) to enter specific
length, or SEP (separator) to enter option of NONE, TIC, or LINE.
Justify – Set horizontal and vertical justification of legend.
Rotate – Set rotation of legend to 0, 90, 180, or 270 degrees.
Mirror – Reverse label content (renders it readable, for instance, as a
clear label on the bottom of a Petri dish). Valid options are ON or
OFF, on whole label or zone by zone.
Units – Change units (to inches, millimeters, or points) for displaying
label and font sizes.
Barcode – Add Code 39 or Code 128 barcodes.
Set Time – Set the time to print a real-time stamp on your label.
Set Date – Set the date to print a real-time date stamp on your label.
Language – Change the default language.
PC – Connect to PC using communications cable.
Battery – View graphical indicator of energy remaining in battery.
See Appendix A– Menu Tree for a listing of submenus related to each section.
12
Softkey
[VIAL]
[CONT]
[JUST]
[ROT]
[MIRR]
[UNIT]
[BAR]
[TIME]
[DATE]
[LANG]
[PC]
[BATT]
User Manual