Printing The Time/Date Stamp; Setting Units - Brady LabXpert User Manual

Printing the Time/Date Stamp

Print Time
To print the time stamp, press [FUNCTION]
stamp fits on your label, the time symbol
If it does not fit, you will receive this error message: Cannot Fit.
The time prints on your label (Hour/Minute or 12/24 format), for example, 9:30 PM or 21:30.
Print Date
To print the date stamp, press [FUNCTION]
stamp fits on your label, the date symbol
If it does not fit, you will receive this error message: Cannot Fit.
The date prints on your label in dd/MON/yy format. For example, 15/MAR/07.
Note: The time and date stamp reflects real time. Therefore, the time and date printed
on a label reflects the time at printing.

Setting Units

The printer allows you to view both label measurements and font sizes in a variety of units.
To change default units:
1. Press [MENU].
2. Press the [NEXT] softkey.
3. Press the [UNIT] softkey.
The following menu options appear,
with the display screen showing the
current settings:
• To change the default unit for label measurements, press [LABL],
[MM].
or
• To change the default unit for fonts, press [FONT], then press [POINT], [INCH],
or [MM]. Inches, millimeters, and points refer to the height of a character.
4. Press [ENTER]
User Manual
appears in the place in which you have your cursor.
appears in the place in which you have your cursor.
.
+ [INSERT TIME]
+ [INSERT DATE]
. If the time
. If the date
press [INCH],
then
25