Brady LabXpert User Manual page 23

Auto Sizing Text
The auto size feature works on a whole label/all zones basis, not line by line. As you enter text and/or
characters, if they do not fit, the printer calculates a new size, allowing the largest font size required
to fit on the current line.
To auto size text and/or characters:
1. Press [FONT SIZE].
2. Press the softkey beneath [AUTO].
3. Press [ENTER].
Note: When rotation is altered, auto sizing adjusts accordingly; if rotation won't allow
smallest font to fit, the error message "Cannot Fit" appears. Also, if rotation will cause
cropping of any text lines, the same "Cannot Fit" message appears, and rotation will
not occur.
User Manual
Press the [AUTO] softkey to toggle auto sizing on and off.
Note: When AUTO is toggled to ON, the auto size feature
stays on until OFF is selected; however, you can still
manually alter the font size on individual lines while the
auto size feature is on.
17