Multi-Zone Labels - Brady LabXpert User Manual

•
[HR] (Human Readable)
Select ON or OFF (HR Font Size = 7 pt.).
•
[WIDTH] (Barcode Width)
Select 2 dots or 3 dots.
4. Press [ENTER].
print as such (if HR has been selected, the text will be centered below).

Multi-Zone Labels

The multi-zone label feature works with numerous label media, for instance, a Lab Vial Side and Top
cartridge such as X-98-499. Once you install the appropriate cartridge, the printer will recognize it
and allow you to create and format multi-zone labels.
Multi-Zone Label Example
Zone 1
Note: Continuous and Vial modes are disabled when die-cut label media is installed.
If you have continuous label media installed, the printer will not recognize entry of
multi-zone commands. See Glossary of Terms on page 45 for complete definitions.
To create a multi-zone label:
1. Install a multi-zone (die-cut label) cartridge.
2. Enter characters for Zone 1.
3. Press [FUNCTION]
4. Enter characters for Zone 2.
Note: Pressing [FUNCTION]
Zone 1.
5. Press [PRINT].
User Manual
When you print the label, the line(s) designated as barcode will
The display will
show that you are
in Zone 1 of 2.
+ [NEXT ZONE].
The display will
show that you are
in Zone 2 of 2.
+ [PREV ZONE]
Zone 2
toggles back to
31