Beam SD7 series User Manual page 47

LOCATION BUTTON MODE
Single Press
(until 1 beep
sounds)
Single Press
5sec
(until 2 beeps
sound)
* This action is optional, and only when tracking for your Extreme Handset
is configured and activated. Using the Track button only initiates the
command to send a Quick GPS message - check that the Extreme Handset
is configured correctly.
# A beep will only sound if audible alerts are enabled in Eagle
ACTION
In Tracking Mode*:
Send a tracking message
to the pre-configured
destination in the Extreme
Handset
Enables / Disables Track
button
LED/SOUND
LED flashes GREEN
for 5 seconds.
A beep will sound
to indicate that a
tracking message
is to be sent#
LED Solid GREEN is
enabled, LED OFF
is disabled
47