Beam SD7 series User Manual page 38

NOTE:
The DriveDOCK Extreme internal ringer will also sound during
an incoming call. This can be changed by a single press of the
Ringer button, whilst out of call. (Please refer to the section "Ringer
Selection" for more details.)
Bluetooth® Phone Call - Mobile Originating
A Bluetooth® call can be started by using the Extreme Handset keypad.
1. Ensure that the Bluetooth® audio headset is connected with the
DriveDOCK Extreme, i.e. the Bluetooth® LED is turned on in blue.
2. Dial the phone number (using the full country code) on the Extreme
Handset keypad or press the Call button on the Bluetooth® headset
which will then dial the last called number. A call progress message will
appear on the Extreme Handset display and the audio is automatically
routed to the Bluetooth® headset. During the call, the Bluetooth® LED
will flash slowly in blue.
3. Press the red key on the Extreme handset to terminate the call.
Options:
A. During a call, you may transfer the audio to the optional Privacy or
Intelligent handset by removing it out of its cup. This automatically
directs the call audio to the Privacy/Intelligent handset. To return
the call back to the Bluetooth® headset, put the Privacy/Intelligent
handset back in its cup.
B. Audio may be transferred back and forth between the Bluetooth and
the hands-free speaker by briefly pressing the Bluetooth button.
Bluetooth® Phone Call – Mobile Terminating
A Bluetooth® call can be answered by using the Extreme keypad.
1. Ensure that the Bluetooth® audio headset is connected with the DriveDOCK
Extreme, i.e. the Bluetooth® LED is turned on in blue.
2. Answer the incoming call by either one of the below:
• Pressing the Bluetooth® headset answer button
• Pressing the green key on the Extreme keypad.
38