Beam SD7 series User Manual page 16

Tracking / Alert Monitoring
The DriveDOCK Extreme utilizes the Iridium Extreme's tracking and
emergency notification functions. The Track button is enabled (factory
default setting). The Alert Loop (wires to an emergency distress button) is
disabled, and requires Eagle Configuration Tool to enable it.
Tracking
When the Track button is pressed it initiates a Quick GPS message in the
Iridium Extreme handset.
The Track button can be enabled or disabled by holding the track button
for 5 seconds. The Track button is enabled when Track LED is solid GREEN.
Pressing the Track button (when enabled) then initiates a command for the
Iridium Extreme Handset to send a Quick GPS message. Please ensure that
the Quick GPS settings in the handset are correct before using this feature.
Alert
The DriveDOCK Extreme will trigger the emergency SOS function of the
Iridium Extreme handset when there is a break (OPEN) in the alert loop wires.
Please ensure that the SOS settings in the handset are correct before using
this feature.
MyBuddy Extreme Web Portal
MyBuddy Extreme is BEAM's own global web based alert, monitoring and
tracking application, which enables you to track, trace and monitor your asset
anywhere, for a small monthly fee through a simple-to-use web portal.
For more information about MyBuddy Extreme please visit
www.mybuddyextreme.com
16