Table of Contents
Advertisement
Step 5 - Connect Privacy Handset (Optional–Extra Order)
The DriveDOCK Extreme provides a 4-pole 3.5mm audio socket at the
bottom of the Dock, for connection to the BEAM Privacy Handset.
This provides a local handset function, conveniently mounted next to
the DriveDOCK Extreme cradle.
1.
The Privacy Handset Kit (purchased/ordered separately) contains a
handset cup, a mounting bracket, space plate, screws, washers and
nut bolts.
2.
Attach the handset cup to the mounting plate in the desired left or
right orientation.
3.
Place the spacer into the circular cavity in the rear of the Dock. Using
the longer (M4x20) screws provide in the kit, secure the mounting plate
between the Dock and the RAM base. The shortest (M4x8) screw to
secure to the back of the Dock and the 3 x M4x12 screws to secure the
cup with the washer and nut bolt behind the bracket.
a
+
4.
Plug the Privacy Handset 4-pole connector into the bottom of the dock.
Privacy Handset mode is enabled when the handset is removed from the
cup. Please ensure to re-dock the Privacy Handset when not in use.
b
c
+
d
e
+
+
=
25
Advertisement
Table of Contents
