Table of Contents
Advertisement
Step 1 - Mounting the DriveDOCK Extreme cradle
The DriveDOCK Extreme is supplied with a universal RAM® mount bracket
that enables mounting to any flat surface (vertical or horizontal) within
a vehicle, attached on a wall or on a table as required.
1.
Attach one pivot base to the rear of the DriveDOCK Extreme using
the M4 screws and washers supplied.
2.
Secure the second pivot base to the location you have selected for
mounting the DriveDOCK Extreme. (screws shown not supplied)
3.
Use the interconnecting arm of the RAM® mount to secure the
DriveDOCK Extreme to the pivot base and tighten into the desired
location firmly using the wing nut on the arm.
21
Advertisement
Table of Contents
