Table of Contents
Advertisement
DriveDOCK Extreme Front Panel
LOCATION
BUTTON MODE
Mute press
On/off
Up/Down
OR
Brightness -
dual button
simultaneous
+
press (2 seconds)
ACTION
In a Call:
Mute the microphone
(uplink) on the Hands-
free, optional privacy
handset, or optional
Intelligent Handset
In a Call:
Increase/decrease
volume on the audio
device in use
Out of Call or Incoming
Ring:
Increase/decrease
volume of incoming ring
tone on the external or
internal speaker. (The
lowest setting will silence
the Ringer)
Brightness Mode:
Increase/decrease the
LED intensity
Out of Call:
Enter LED brightness
change mode. Then Press
UP and/or DOWN arrows
to vary intensity.
Mode will automatically
exit after 5 seconds after
the last button press.
LED/SOUND
LED turns RED
Muted
LED turns OFF
Not muted
Audio will sound
louder/quieter
with each press.
A beep will
sound indicating
the increased/
decreased ring
tone volume of
the external or
internal speaker
– whichever is
currently set by
the Ring (Bell)
button.
All Button LEDs
will be increased/
decreased with
each press.
Status LED flashes
YELLOW 3 times
and all Button
LED's will change
WHITE. A single
beep will sound
when entering
brightness change
mode.
A short double
beep will sound
when exiting
change mode.
45
Advertisement
Table of Contents
