Advanced Menu - Getac M230 User Manual

IDE Channel 0 / Secondary Master/Slave sets the type of storage device installed.

Advanced Menu

The Advanced menu contains the I/O (input/output) configuration settings
of the system.
Serial Port COM1 enables or disables the serial (COM1) port. The options are
Enabled Disabled
and
Serial Port COM2 (FIR) enables or disables the infrared (COM2) port. The
Enabled
options are
Serial Port COM3 (Touchscreen) enables or disables the touchscreen (COM3)
function. The options are
Serial Port COM4 (XBay) enables or disables the XBay (COM4) port. The
Enabled
options are
Parallel Port enables or disables the parallel port. The options are
Disabled
and .
Mode sets the mode for the parallel port. The options are
Bi-directional ECP
,
SATA – Device 31, Function 2 sets the primary/secondary
compatible/enhanced SATA/PATA (serial ATA / parallel ATA) controller in
Legacy/Native mode. The options are
.
Disabled
and .
Enabled
and
Disabled
and .
EPP
, and .
Disabled
.
Compatible Enhanced
and
Enabled
Output only ,
.