Operating With Projector Control - Christie DS+750 User Manual

Basic Operation

Operating with Projector Control

Zoom Adjustment
Display "Zoom" on the screen. Press the ZOOM button
and then press the point
the image.
Focus Adjustment
Display "Focus" on the screen. Press the FOCUS button
and then press the point
of the image.
Lens Shift Adjustment
Display "Lens shift" on the screen. Use the Point
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 55 percent, or
sideways up to 45 percent from the central axis of the lens
shift. Press and hold the LENS SHIFT button for more than
5 seconds to return to the central position. See page 18 for
details.
Auto PC
Adjustment
Operate the Auto PC Adj. function. The computer screen
adjustment can be done easily by pressing this button.
See page 36 for details.
Light Function
Light function is used to turn on the lights on the side
control and around terminals. To turn off the lights, press
the Light button again.
Note:
Shutter Function
Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter, press
the SHUTTER button again. Refer to p.60 for detail of
setting for the Shutter function.
Note:
28
buttons to zoom in and out
buttons to adjust the focus
Side Control
AUTO PC ADJ.
button
Zoom
Focus
Note:
SHUTTER button
LIGHT button
ZOOM button
LENS SHIFT
button
FOCUS button
POINT buttons
INFORMATION
button
+
DS 750 User Manual
020-000210-01 Rev.1 (06-2009)