Setup And Operation; Inventory; Setup; Connections - Waldorf Pulse User Manual

6. Setup and Operation

6.1 Inventory

The Waldorf Pulse comes complete with:
• the Waldorf Pulse
• 12V/500mA adapter
• warranty card
• this handbook
Please ensure all the items above were included. If something is missing, contact your local
dealer.
We recommend that you save the original packing material for future transport.
Caution:

6.2 Setup

Place the Waldorf Pulse on a clean, even surface.
If you choose to take the device on the road, we suggest you mount it in a 19" rack. The
Pulse takes up 89 mm, equivalent to two rack spaces.

6.3 Connections

In order to get started with your Pulse you will need an AC wall socket, a MIDI keyboard, a
mixing console, an amp and an audio monitor such as a speaker cabinet.
You can also use a computer or sequencer rather than a MIDI keyboard.
MIDI Keyboard
12
Make sure you fill out the warranty card and send it to the appropriate
distributor. The address is printed on the registration card. This is the
only way we can keep you informed of upgrades and updates. Other
available services are listed on the warranty card.
MIDI
Out
Stereo Out
Left/Mono

Diagram 1: Connections

MIDI
In
Semitone / Tune Shape / PW OSC1 Semitone / Tune Shape / PW
MOD SOURCES DESTINATIONS LFO1 Speed / Shape LFO2 Speed / Delay Sync / Keytrack Osc 1
0 off 7 Envelope 2 0 Pitch 9 Noise Level
8 Velocity Attack Decay Sustain Release
1 LFO1 1 Ocs1 Pitch 10 Cutoff
2 LFO1 *Modw. 9 Keytrack 2 Osc2 Pitch 11 Resonance
3 LFO1 *Aftert. 10 Pitch Follow 3 Osc3 Pitch 12 Volume
4 LFO2 11 Pitchbend MIDI 4 Pulsewidth1 13 Panning Pitch Mod / Source Portamento / Mode Select Source
5 LFO2 * Env1 12 Modwheel 5 Pulsewidth2 14 LFO1 Speed
6 Envelope 1 13 Aftertouch 6 Osc1 Level 15 Mod1 Amount
14 Breath Ctr. 7 Osc2 Level
ARP
15 Control X 8 Osc3 Level Active / Range Tempo / Clock Mode Pitchbend Scale
Mode
Dump
Cutoff / Keytrack Env1 Sens / Velo Sens Cutoff Mod / Source Resonance
Store Compare
Shift
Pulse
Stereo Out
Right
Line Line
In L In R
Mixer
OSC2 Semitone / Tune Shape OSC3
Power
Osc 2 Osc 3 / Noise MIX
Keytrack Trigger ENV1/2
Amount Destination MOD
GLB
Mastertune / Control X MIDI Channel / ID
VCF Volume / Velo Sens Panning VCA
adapter
Line Line
Out L In L
Line Line
Out R In R
User's Manual Pulse • PulsePlus
Power
Amp