Waldorf Pulse User Manual page 31

Amount
The intensity of the modulation Amount depends on the type of modulation source
you select:
• For the so-called unipolar modulation sources Env1, Env2, Modwheel, Aftertouch,
Velocity, Breath Control and Control X, the modulation amount lies within the
range of 0...1.
• For the so-called bipolar modulation sources LFOs, Keytrack and Pitch Follow, the
modulation amount lies within the range of -1...0...+1. Please note that the linked
modulation sources LFO1*Modwheel, LFO1*Aftertouch and LFO2*Env1 are also
bipolar modulation sources.
• For the modulation sources Keytrack and Pitch Follow, a value of +45 represents
100% of the scale.
Destination
Here are some examples of modulation assignments:
User's Manual Pulse • PulsePlus
-64...+63 Determines the amount of modulation in a value range
of -64 to +63.
The following table illustrates the relationship between the modulation
amount and significant musical intervals. For bipolar sources, the
interval is doubled.
Interval in
semitones
1
2
3
4
5
6
7
...
Table 2: Modulation amount scale
For intervals greater than a fifth (tonic to mediant), the Amount is
proportional.
0...15 Destinations are assigned in the same manner as
sources. The available destinations are also printed on
the front panel
Table 3: Modulation destinations
Interval Mod Amount
small Second
large Second
small Mediant
large Mediant
small Subdominant 13
large Subdominant
Dominant
...
.
0 Pitch
1 Osc 1 Pitch
2 Osc 2 Pitch
3 Osc 3 Pitch
4 Pulsewidth 1
5 Pulsewidth 2
6 Osc 1 Level
7 Osc 2 Level
8 Osc 3 Level
9 Noise Level
10 Cutoff
11 Resonance
12 Volume
13 Panning
14 LFO 1 Speed
15 Mod 1 Amount
6
8
10
12
14
15
...
31