The Store Function - Waldorf Pulse User Manual

7.4 The Store Function

After you have finished editing a program, you must save it if you intend to use it again. The
program memory locations 1 through 40 are available for this purpose.
This is how you store a program:
• Press and hold the Shift key
• Briefly press the Scroll key
indicated in orange lettering.
• Release the Shift key
• A flashing S. appears in front of the selected program number in the display:
The indicated memory location number will always be from 1 to 40, i.e. within the
range of the freely programmable memory locations. If you have edited a factory
preset program, it must be stored in one of these memory locations. The Pulse will
suggest a program number equivalent to the original number plus 40.
• If you want to store the program at a memory location other than the suggested
one, use the Scroll keys
• Press and hold the Shift key
You have now stored the program.
When you activate the Store function, Edit or Compare modes are terminated.
By pressing the Mode key
press the Store key
User's Manual Pulse • PulsePlus
.
Example: Program 9 is the selected
memory location
Original Program
1...40
41...80
81...99
P.rn
and
, you can terminate the process at any time before you
for the final time.
.
. This Scroll key's alternate function is Store,
Suggested Program
1...40
1...40
1...19
20
to select the desired program number.
and press the Store key again.
17