Random Program; Editing Sound Parameters; Diagram 3: Parameter Matrix - Waldorf Pulse User Manual

Random Program

If you Scroll beyond program 99, you will see the program P.rn, i.e. a random program.
When you select this program, the Pulse will generate a sound at random.
When the Pulse switches off, its memory stores the last active program and reactivates this
program when the Pulse switches back on. However, any edits you did not save are lost
when the Pulse switches off.

7.3 Editing Sound Parameters

In order to change or edit a sound in the Pulse, you must access the appropriate
parameters. These sound parameters are arranged in a matrix. Accessing parameters
requires two steps: First you must select the desired parameter level. Then you can use the
rotary pots located below the six columns to edit the parameter directly. The parameters
and how they function are described in detail in the next chapter.
Mode
Dump
Shift
According to the extended functionality of the Pulse Plus, the parameter groups
GLB differ slightly from the shown diagram:
Osc 1
Please read the chapter about the corresponding parameter group in this manual.
This is how you access a desired parameter:
• Press the Mode key
level illuminates.
• Alternatively, you can press and hold the Mode key
and
• Press the control feature
parameter.
User's Manual Pulse • PulsePlus
Random program
OSC1
Semitone / Tune Shape / PW
LFO1 Speed / Shape LFO2 Speed / Delay
Attack Decay
Pitch Mod / Source Portamento / Mode
Active / Range Tempo / Clock
Cutoff / Keytrack Env1 Sens / Velo Sens

Diagram 3: Parameter matrix

Osc 2 / External Osc 3 / Noise
repeatedly until the LED
to select the desired level.
located below the column
The display will indicate this
parameter's current value.
OSC2
Semitone / Tune Shape / PW
Sync / Keytrack Osc 1
Sustain Release
Select Source
ARP
Mode Pitchbend Scale
VCF
Cutoff Mod / Source Resonance
MIX
Select
Semitone / Tune Shape
Osc 2 Osc 3 / Noise
Keytrack Trigger
Amount Destination
Mastertune / Control X MIDI Channel / ID
Volume / Velo Sens Panning
GLB
Value
next to the desired parameter
, and use the Scroll keys
containing the desired
OSC3
MIX
ENV1/2
MOD
GLB
VCA
MIX and
15