Waldorf Pulse User Manual page 13

Follow these steps to connect the devices:
• Turn all devices off.
• Connect the Pulse's two audio ouputs Stereo Out Left/Mono
Stereo Out Right
If you do not choose to connect a mixing console, you can patch the Pulse's output
signals directly to an amp. Use an input usually called Aux or Tape input. If you do
not want to send a stereo signal, use Stereo Out Left/Mono
insert a plug into Stereo Out Right
left output.
Caution:
• Connect your keyboard's MIDI Out jack to the Pulse's MIDI In jack
• Connect the included adapter to the Pulse's power supply socket
• Insert the adapter plug in a suitable wall outlet.
• First switch on the connected MIDI keyboard and then the mixing console and
amp.
Caution:
User's Manual Pulse • PulsePlus
to your mixing console.
Never use the mic or phono input of the connected amp.
• Before connecting and disconnecting the Pulse to a power supply
source, turn your amp's volume control all the way down to avoid
damage due to on/off switching noise.
• The Pulse produces a high level output signal (see technical data).
Please take care that the connected playback device is suitable for
the high level of an electronic instrument.
, then the mono master signal is routed via the
and
output. If you do not
.
.
13