Cv/Gate Parameters - Waldorf Pulse User Manual

MIDI Device ID

CV/Gate Parameters

CV/Gate Channel
CV In Adjust
User's Manual Pulse • PulsePlus
When this parameter is set to Off, the Pulse sends out the played notes via CV
and Gate Out
1 Out
triggers the sound generation of the Pulse.
In
When the parameter is set to 1...16, the CV/Gate interface is operating
independently. Received notes on the selected Channel are sent out as control
voltages via CV 1 Out
and Gate In are transformed into notes and sent on the selected channel.
The internal sound generation will not be affected.
To proceed the adjustment, connect the CV output of the keyboard to the CV In
input of the Pulse. Connect the Gate jacks in the same way. Now adjust the
parameter to a value, that causes the Pulse to generate a proper tune on the
played notes.
Please note that the CV In input can operate with linear scaled control voltages
of 1V/Octave only.
Device-ID for system exclusive data transmission.
0...126 Preset value is 0
MIDI send and receive channel for the CV/Gate
interface
Off, 1...16
Off
Example: Channel 3
. An incoming control voltage at CV In
and Gate Out . Incoming control voltages at CV In
Adjust parameter for the CV In input.
-64...+63
and Gate
49