Update Firmware - NetComm 4G100W User Manual

Update Firmware

This page allows you to upgrade the 4G100W 4G LTE WiFi Router's internal software.
To upgrade the firmware of your 4G100W 4G LTE WiFi Router, you need to download the upgrade image file to your local hard
disk, and then click the Browse button and navigate to the location of the firmware file on your computer.
Once you have selected the new firmware file, click Apply to start the upgrade process.
The upgrade process takes several minutes. During the firmware upgrade process, all the lights on the front of the 4G100W 4G LTE
WiFi Router will flash.
Do not interrupt the power supply during the upgrade process.
Once completed, follow the on-screen prompts and your 4G100W 4G LTE WiFi Router will restart.
After a firmware upgrade it is important to perform a factory reset to so that the firmware loads correctly onto the router. To do this
select the Restore button from the System > Settings router page.
YMLN4G100W
www.netcommwireless.com
Figure 39 - Advanced View - Firmware Update
4G LTE WiFi Router
44