Band Settings - NetComm 4G100W User Manual

Band Settings

The band settings page enables you to select which frequency band you will use for your connection and enable you to scan for
available network operators in your area.
The following frequency bands are available to select from:
 LTE ALL
WCDMA ALL

 North America
Europe

 GSM ALL
North America 2G

 Europe 2G
Europe 3G

All bands

The default setting of "All bands" should be appropriate for the majority of users.
You can also scan for available service providers in your area by selecting "Manual" for the "Current Operator Selection Mode" and
then clicking the scan button.
A list of the detected mobile broadband service carriers in your area will be displayed. Select the most appropriate mobile
broadband service from the list shown and click "Apply".
The default setting of "Automatic" should be appropriate for the majority of users and locations.
YMLN4G100W
www.netcommwireless.com
Figure 10 - Advanced View – Band Selection
Figure 11 - Advanced View – Operator Selection
4G LTE WiFi Router
18