Table of Contents
Advertisement
Connectivity
The following ports are available on the rear of the 4G100W in the cable compartment. Please remove the compartment cover by
gently pulling on the grip marks near the OPEN label at the top of the device, in the direction of the arrow.
INTERFACE
SIM Slot
LAN 4 - 2
LAN 1 / WAN
Power
Reset
Note: There is a non-functional RJ11 port on the equipment which is covered by an RJ-11 Cap.
4G LTE WiFi Router
7
Figure 2: Rear Panel
Insert your SIM card here (until you hear a click). Please be careful to insert the SIM card in
the correct orientation by viewing the printed icon on the router housing.
LAN Port for wired Ethernet clients (Computers, Laptops etc.).
LAN or WAN port for wired Ethernet clients or bridged devices (an ADSL modem etc.).
Power connector for use with a DC 12V 1.5A Power Adapter.
Holding this button down for 10 seconds or more will reset the router to factory defaults.
Table 3 - Rear Panel Ports
FUNCTION
YMLN4G100W
www.netcommwireless.com
Advertisement
Table of Contents
