NetComm 4G100W User Manual page 53

8. Is the NetComm 4G LTE WiFi Router secure; can other people access my wireless network?
The NetComm 4G LTE WiFi Router comes configured with WPA2-PSK WiFi security enabled. When accessing the router
interface for the first time, type 192.168.20.1 into the address bar of a web browser, and configure the wireless security
settings of the router (please see the Quick Start Guide for more information on connecting your data devices to the
NetComm router). Only people you allow will be able to connect to the NetComm router ensuring your connection is
secure and safe.
9. Can I change the name and password of my wireless network?
Yes. You can change your NetComm router settings from the router's user interface by typing 192.168.20.1 into the
address bar of your Web browser. The SSID (Service Set Identifier) or network name, security standards (WPA, WPA2,
WEP) and your WiFi password can each be customised to suit your requirements.
10. How do I share my Internet connection, using the NetComm router, with other users?
Provide any users with whom you wish to share your WiFi Internet connection, the SSID (Service Set Identifier) and WiFi
network password for your 4G100W 4G LTE WiFi Router. Each user will need to select the 4G100W 4G LTE WiFi Router
SSID, on their WiFi enabled computer or device and enter the network password you provide.
11. What is the difference between upload and download speeds and why do they differ?
Uploading is when you send information (e.g. emails) from your computer and downloading is when you receive
information via the Internet. The speeds at which upload and download operate depend on the way you use the Internet,
the size of files you send and receive, the network capability and current network traffic.
12. Do I need to attach an antenna on this device?
No. Your NetComm router comes equipped with an internal WiFi antenna.
13. I have lost the security card that came with the setup instructions. What can I do?
If you have lost your security card, and forgotten the wireless security details (SSID and WiFi network password), check
that there is a label stuck to the base of your 4G100W 4G LTE WiFi Router with all your original security details. If the label
is unreadable or has been removed, the WiFi network password can be viewed/reset by logging in to the Management
Console using an Ethernet Cable connected to the LAN port of the 4G100W 4G LTE WiFi Router.
14. I forgot my Management Console password. What can I do?
If you have forgotten your Management Console password and cannot access the Web user interface, you will need to
reset your 4G100W 4G LTE WiFi Router back to factory default settings. To reset your device press and hold the reset
button on the back of your 4G100W 4G LTE WiFi Router for 10-15 seconds. All the indicator lights on the unit will flash
when your device has reset. After a reset, the default WiFi settings (SSID and WPA key) will match those found on the base
of your 4G100W 4G LTE WiFi Router. (Note - this will also reset any custom settings and passwords you may have already
set up).
4G LTE WiFi Router
53
YMLN4G100W
www.netcommwireless.com