NetComm 4G100W User Manual page 23

WAN
The WAN page allows you to configure the optional WAN Ethernet port. Select the WAN connection type suitable for your
environment and configure parameters according to the selected connection type. In order to access this page, you must first set
Ethernet port 1 to WAN Mode from the Status screen.
DHCP (Auto config)
The 4G100W 4G LTE WiFi Router when connected to the internet will be assigned a WAN IP address from the Internet Service
Provider. Leave everything as default unless instructed by your Internet Service Provider.
STATIC (fixed IP)
If your WAN connection uses a static IP address, please select "STATIC (fixed IP)" as the WAN Connection Type and enter the
required information in the fields provided as shown below.
NAME
IP Address
Subnet Mask
Default Gateway
Primary/ Secondary DNS
4G LTE WiFi Router
23
Figure 17 - Advanced View - WAN - Static IP Settings
DESCRIPTION
Type in the IP address assigned by your Internet Service Provider.
Type in the Subnet mask assigned by your Internet Service Provider.
Type in the WAN Router assigned by your Internet Service Provider.
Type in the DNS address assigned by your Internet Service Provider.
Table 14 - Advanced View - WAN Settings - Static IP
YMLN4G100W
www.netcommwireless.com