NetComm 4G100W User Manual page 41

SNMP
The Simple Network Management Protocol (SNMP) feature can be used to display or collect data from the 4G100W that can be
sent to a network management system so that the 4G100W can be monitored for conditions that require administrative attention.
Various system information including interface statistics, uptime, and memory usage are available when viewed with an appropriate
SNMP trap monitor.
OPTION
Enable SNMP
Read-Only Community Name
Read-Write Community Name
Download MIB File
Trap Destination
Heartbeat Interval
Trap Persistence Time
Trap Retransmission Time
4G LTE WiFi Router
41
Figure 36: Advanced View - Services - SNMP
Use this field to switch on the SNMP functionality
The default name to identify the router with read only privileges is "public". This name can be changed to further identify
the router from other network devices.
The default name to identify the router with read and write privileges is "private". This name can be changed to further
identify the router from other network devices.
Use the download link to obtain a copy of the Management Information Base (MIB) file for the 4G100W. This file contains
all the available SNMP identifying objects for each module that the 4G100W uses.
The destination IP address or hostname for traps to be sent.
The period at which heartbeat notifications are generated.
Specifies the length of time in seconds that a trap remains persistent.
The number of seconds to wait before a trap is retransmitted.
Table 20: Advanced View - Services - SNMP Settings
DEFINITION
www.netcommwireless.com
YMLN4G100W