Table of Contents
Advertisement
DATE
PR START STOP
01
02- 02 19:30 20:15
/
- -
- - - - - - - : - - - - : - -
/
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
:SELECT
OK :ENTER
INFO :EXIT
MENU
ITIMER
MODE
INSTALL
SERVICE
:SELECT
OK :ENTER
INFO :EXIT
RECORDING
10
Switch off VPS/PDC (if it is not required) by pressing »
to select »
– »
11
Save the recording data by pressing »
– The »TIMER« menu is displayed on the screen.
S
*
S
*
- -
12
For further recordings, repeat the procedure from step 3, or
- -
- -
terminate the function by pressing »i«.
- -
13
Press »
– The video recorder display now shows the time and the
TIMER symbol »
ding stand-by mode.
Checking, modifying or deleting
recording information
Preparation
Switch on the television.
Select the channel position »AV« on the television for the video
recorder.
Calling up the TIMER menu
1
If the video recorder is in recording stand-by mode, press
and hold down »
2
Press »
3
Press »i« to open the main menu.
Note:
Select the function you require in the »TIMER« menu. For
information on using these functions see the following sec-
tions, each time starting from Step 1.
__________________________________________________________
« and then »+« or »
*
« in the display denotes VPS recording.
*
Timer
on« to switch the VCR to recording stand-by.
«. The video recorder is now in recor-
Timer
on«.
0« to switch on the video recorder.
1 ...
–
« to switch off VPS.
«.
OK
«
†
33
33
33
33
Advertisement
Table of Contents
