Table of Contents
Advertisement
DATE
PR START STOP
01
02- 02 - - : - - - - : - -
/
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
DATE:
DAY/MONTH
0-9
< >
:SELECT
INFO :EXIT
DATE
PR START STOP
01
02
02
- - : - - - - : - -
/
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
PR :ZDF
0-9
< >
:SELECT
INFO :EXIT
DATE
PR START STOP
01
02 02 19:
--
- - : - -
/
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
0-9
< >
:SELECT
INFO :EXIT
DATE
PR START STOP
01
02- 02 19:30 20:15
/
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
SP/LP/A: TAPE SPEED
< >
:SELECT
INFO :EXIT
32
32
RECORDING
4
S
*
- -
- -
- -
5
- -
- -
:DATA
:CHANGE
S
*
6
- -
- -
- -
- -
- -
:DATA
:CHANGE
*
S
- -
- -
- -
- -
- -
:DATA
7
:CHANGE
8
9
*
S
- -
- -
- -
- -
- -
:CHANGE
__________________________________________________________
Confirm the date (DATE) by pressing »
enter the desired date in four digits with »
If you want to record the programme daily or weekly, press
»+« or »
« to select »D« (daily) or » W « (weekly). » – « in
–
the display means that it is a once-only recording.
Press »
« to confirm the setting.
†
Note:
You cannot use the "daily" function for recording on Satur-
days and Sundays.
Enter the two-digit channel number (PR) using the
»
« buttons.
0 ... 9
Note:
If you are recording the audio/video signal from an exter-
nal device rather than one of the television stations select
» AV 1«, » AV 2 «, or » CV« as the channel by pressing »+«
or »
–
«.
Recording from a satellite receiver:
If a television station from an installed satellite receiver
without a SAT control line is programmed, select the chan-
nel position »AV 2« with »
must be switched on at the selected recording time and for
the duration of the TIMER recording.
(This is not necessary for the Grundig VCR-SAT module or for
many Grundig satellite recievers with a SAT control line.)
Enter the time to start recording (START) as four digits with
»
«.
0 ... 9
Enter the time when the recording finishes (STOP) as four
digits with »
«.
0 ... 9
Set the tape speed using »+« or »
»S« is standard play mode;
»L « is long play mode;
»A« is automatic mode.
– In automatic mode the video recorder compares the
remaining playing time with the length set for the
recording and automatically selects long play mode if
necessary.
Note:
Automatic mode is not available for TIMER recordings with
VPS/PDC.
«, or
†
0 ... 9
« or »
«. The satellite receiver
+
–
« if necessary:
–
«.
Advertisement
Table of Contents
