Table of Contents
Advertisement
10
CONNECTION AND PREPARATION
Inserting batteries in the remote control
1
Open the battery compartment by pressing the tab and
removing the lid.
2
When inserting the batteries (mignon type, for example
LR 6 or AA, 2 x 1,5 V), observe the polarity designation on
the battery compartment.
Note:
If the video recorder no longer reacts properly to remote
control commands the batteries may be flat. Always remove
flat batteries. No liability is accepted for damage resulting
from leaking batteries.
Environmental note
Batteries, including those which are heavy metal-free, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound way, for exam-
ple at public collection points. Find out about the legal regu-
lations which apply in your area.
Connection possibilities
In this section you will find examples for connecting:
– a video recorder and television set;
– a video recorder, television set and a Grundig VCR-SAT
module;
– a video recorder, television set and Grundig satellite receiver.
Instructions for connecting other devices, such as a decoder, a
HiFi system or a satellite receiver, without a control line can be
found starting on Page 36.
Notes:
If your television is equipped with Megalogic functions,
the video recorder and television set must be connected
with the EURO-AV cable provided; see step 3, page 11
and 12, or step 7, page 15.
If the video recorder is connected to a television set with
a 16:9 format, observe the setting in the section, "Ope-
ration with a format 16:9 television" on page 56.
___
Advertisement
Table of Contents
