Table of Contents
Advertisement
16
16
TUNING
______________________________________________________________
Tuning the video recorder and the
television
You do not need to do this if the video recorder and the televi-
sion are connected via a EURO-AV (Scart) cable.
1
Switch on the television.
2
Select the »AV« channel position on the television set for
recorder playback via the antenna cable.
3
Tune the television to a free channel in the UHF band bet-
ween channel 21 and channel 69. A free channel is one
which does not carry a signal from a television station (you
can only see and hear static).
– Many televisions display the channel number.
4
Store the free channel position on the television.
5
Press » « to switch the video recorder to stand-by, then
press and hold down »i«.
– The display on the video recorder reads something like
» C H 2 7 «.
6
Set the channel (in this example, channel 29) by pressing
* P Ü
»
the video recorder appears on your television screen.
7
If the quality of the test picture is OK, press »i« to save the
setting.
– The video switches to stand-by.
Note:
If the quality of the test picture is unsatisfactory, or if the pic-
ture quality of other channels has deteriorated, then you
should find another free channel on the television and repe-
at the setting from steps
You can switch off the station on the video recorder. Fore
more information see the "Switching the station on the
video recorder on and off" on Page 51.
« on the video recorder, until the test picture from
to 5.
1
Advertisement
Table of Contents
