Table of Contents
Advertisement
DATE
PR START STOP
01
02
02 19:30 20:15
/
01
02
04 21:00 22:00
/
- -
- - - - - - - : - - - - : - -
/
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
- - / - - - - - - - : - - - - : - -
:SELECT
OK :ENTER
INFO :EXIT
RECORDING
Deleting recording data
1
Highlight the » TIMER« line by pressing »
– The » TIMER« menu appears.
*
S
S
*
*
S
2
Select the TIMER item in question with »+« or »
- -
- -
press »Clear« to delete it.
- -
3
Press »i« to quit the »TIMER« menu.
4
If several TIMER items have been programmed, press
»
Timer
– The video recorder display now shows the time and the
TIMER symbol »
mode.
Interrupting recording stand-by mode
If you have set the VCR to record programs and want to use it
while it is in record stand-by mode.
1
Press and briefly hold down »
– The TIMER symbol »
2
Press »
3
Use the video recorder as required.
Note:
Five minutes before the TIMER recording starts you will see
the following message on the screen: » TIMER RECORDING
TO START SOON«.
You can hide this message by pressing »i«.
Reactivating recording stand-by mode
1
Insert a video cassette with enough playing time and the
erase-protection tab intact into the tape compartment, and
then press »
– The video recorder display now shows the time and the
TIMER symbol »
mode.
__________________________________________________________
on« to switch the VCR to recording stand-by.
«. The VCR is in recording stand-by
« disappears.
0« to switch on the video recorder.
1 ...
Timer
on«.
«. The VCR is in recording stand-by
«.
OK
–
Timer
on«.
« and
35
35
35
35
Advertisement
Table of Contents
