Adding A Remote Control To An Existing User - Paradox User Manual

It is recommended that you change the default System Master code to a code of your choosing. This will prevent unauthorized users from
accessing and modifying options.
Duress User Code
If enabled by your installer, User code 016 can be programmed as a Duress code. If you are forced to arm or disarm your system,
entering the user code for User 016 will arm or disarm your system and immediately transmit a silent alarm (Duress code) to your
monitoring station.
Deleting a User
When you delete a user, the remote control that is assigned to that user will also be deleted. To delete an existing user:
menu
Master code

Adding a Remote Control to an Existing User

To add a remote control to a user that is already programmed in the Magellan system:
menu
System
Master code
28
next
Press
System until
desired
user
next
Press
until
desired
user
ok yes
ok next ok
yes no/yes
Another
user
Program
Modify
No Yes
remote?
label?
The System Master
user cannot be deleted.
no/yes
Another
user
Press
button
User Guide