Setting The Language; Voice Reporting - Paradox User Manual

Deleting a Remote Control
To delete a remote control that is already programmed in the Magellan system:
menu
System
Master code

Setting the Language

By default, Magellan is set to English. To change the language:

Voice Reporting

Use the Magellan console to call you (or someone you choose) on up to two different telephone numbers and play a personalized voice
message (maximum 20 seconds in length) to announce that an alarm has occurred. After receiving the message, press the [#] key on
the telephone twice to acknowledge and end the message. The unit will call eight times (switching between both numbers) or until
someone acknowledges the message. Press the [1] key on the telephone to use the speakerphone feature and to talk through the
Magellan console. To program the Magellan console for voice reporting:
menu
System
Master code
Example: You programmed Magellan's Voice Reporting feature to call your cellular phone and play your recorded message, "There is an alarm occurring
at home." Therefore, whenever an alarm occurs, Magellan will call you on your cellular phone and you will hear "There is an alarm occurring at home".
Press the [#] key on your cellular phone to acknowledge the message.
Advanced Features
next ok next
Press
until
desired
user
ok next ok
Press
until
desired
telephone #
telephone #
ok
Modify
No
label?
menu
System
Master code
ok next
Press
Enter until Record
desired Alrm Mes?
screen
yes no/yes
Delete
Yes
remote?
Another
user
next
Press
until desired
language
ok
Record
your alarm
message
ok
29