Paradox User Manual page 10

Magellan's Keypads
Main Keypad
Use this keypad to enter User
codes, required data and/or to
select desired menus.
8
Use keys [1] to [16] on the center keypad for the following:
Center Keypad
Zones 1 to 16*
OFF = Zone closed (ok)
ON = Zone opened
Flashing = The zone has been tampered with
Press once = Listen to zone's label (e.g.: "Front door")
* = Press and hold key [16] to listen to the label for zone 16. See
Key [16] below for more information.
Users 1 to 16
When programming a user:
OFF = User not programmed
ON = User programmed
Press once = Listen to user label and program or edit a user
X10 programming**
This keypad is also used when programming and using
Magellan's X10 features. Refer to Magellan's X10 Instruction
Guide which can be downloaded for free from our website at
www.paradox.ca.
Key [16]
Press once = Make a telephone call or answer an incoming call**.
Press again to hang up. See page 21.
Press & hold = Listen to the zone label of zone 16.
Fast flashing = Speakerphone in use**. See page 21.
** Available with the MG-6060 only.
User Guide