Advanced Features; Programming User Codes - Paradox User Manual

Chapter 5: Advanced Features
This chapter pertains to features and functions that only the System Master user can access.
This chapter covers User code programming, such as programming new users into the system. This chapter also covers some zone
features as well as instructions on how to customize Magellan to suit your needs.

Programming User Codes

User codes allow access to the system. Magellan supports up to 16 User codes where:
• Every user from 002 to 016 is assigned a User code (user 001 is the System Master).
• Your installer can program User codes to be four or six digits in length.
• Each digit can be any value from 0 to 9.
To create or modify a user:
menu
System
Master code
System Master Code (default: 1234)
The System Master code will give you access to all of the features available on your system as well as the ability to add, modify, or
delete any users.

Advanced Features

next ok
Press
Enter new
until
User
desired
user
Modify
No
label?
Confirm
Yes
new User
Record
label
no/yes
Remote
No
control?
Another
user
Yes
Press
button
27