Utility Reporting - Paradox User Manual

Utility Reporting

Customize which events and when these events will be reported to you by using the Utility Reporting menu. Program from one of four
report types to have the Magellan console call you when certain conditions are met. With this feature programmed, Magellan will call up
to two separate telephone numbers and play a personalized pre-recorded voice message. After receiving the message, press the [#] key
on the telephone twice to acknowledge and end the message. Press the [1] key on the telephone to use the speakerphone feature and
to talk through the Magellan console. To program the Utility Reporting feature:
Menu
System
Master code
Report Types
There are four report types that can be used with Utility reporting:
• Disarm with user: Use this report type to program the Magellan console to call you when specific users disarm the system. After
entering the menu, select the desired user(s) that you wish reported. This feature is useful when you wish to know when specific
people disarm the system.
For example, you can program Magellan to call you whenever your children disarm your system thus informing you that they
have arrived home.
• System troubles: Use this report type to have the Magellan console call you when specific troubles occur. After entering the
menu, select the desired trouble(s) you wish to be notified about. This feature can be used to inform you of a power failure.
• Non-medical Emergency alarm: Use this report type to have the Magellan console call you when specific users require non-
medical emergency assistance. When the programmed users press the appropriate key on their remote controls (see Remote
30
next next
Press until Press
Enter
Utility until
desired
Reporting desired
telephone
screen telephone
# and then
and then # and then
press ok
press ok press ok
OK next next
Press until
Press until
desired report
Record
type and then Alrm Mes?
press ok.
screen
See Report
Types below
for more info.
OK
Record
your
alarm
message
User Guide