Recording From The Radio; Recording From A Cd; Cd Synchro Recording - Grundig MASQ RRCD 9100 PLL User Manual

TAPE MODE
___________________________________________

Recording from the radio

1 Place a tape with the protection tabs intact in the tape compartment and
use » « or »
tape.
Select the tuner as input source with »TUNER/BAND« and tune into
2
the radio station.
G G
Press » « on the device to start recording.
3
– The » « button is automatically engaged.
– The device automatically stops recording at the end of the tape.
4 To interrupt the recording press »II« on the device.
Resume recording by pressing »II«.
5 To break off recording, press »

Recording from a CD

1 Place a tape with the protection tabs intact in the tape compartment and
use » « or »
tape.
Select CD as the input source with
2
To start recording in the middle of a track, start CD playback as usual.
3
As soon as you reach the desired passage, press »
4
G G
» « on the device to start the recording.
– The CD unit starts the playback automatically.

CD synchro recording

Place a tape with the protection tabs intact in the tape compartment and
1
use » « or »
tape.
Select CD as the input source with
2
»I«.
G G
Press » « on the device to start recording.
3
– The » « button engages automatically and the CD playback is star-
ted automatically from the beginning of the CD or the beginning of the
stored music program, if you first pressed » PROGRAM«.
– The device automatically stops recording at the end of the cassette.
« on the device to find the correct position on the
I
«.
« on the device to find the correct position on the
»CD
II«.
« on the device to find the correct position on the
»CD II« and stop the playback with
II« and then
CD
39