Searching For A Passage Within A Track; Playing Back Tracks In Random Order - Grundig MASQ RRCD 9100 PLL User Manual

POP
REPEAT 1
06 02:14
TR
CD
POP
REPEAT ALL
03 01:45
TR
CD
FLAT
INTRO
03 00:05
TR
CD
FLAT
RANDOM
12 00:20
TR
CD
CD MODE
_____________________________________________

Searching for a passage within a track

1 During playback, press »
find the passage you want to hear.
– When » 5a « or »
Note:
During the search the volume is reduced.
Calling up the REPEAT functions
The repeat functions enable you to repeat a single track or the whole CD.
1 To repeat a track, press »REPEAT« once.
– »REPEAT 1« appears in the display and the current track is conti-
nuously repeated.
To repeat all the tracks on the CD, press »REPEAT« again.
2
– »REPEAT ALL« appears in the display and the CD is continuously
repeated.
To quit the functions, press »REPEAT« again.
3
Playing the introductions of tracks on the CD
Press »INTRO« when the CD is in the STOP position.
1
– Display: »INTRO«.
– Playback starts automatically, and the first ten seconds of each track
are played.
To quit this function, press »INTRO« three times.
2
– Display: »INTRO« disappears.
– The current and following tracks are played to the end.

Playing back tracks in random order

1 Press »CD II« to start playback.
Press »RANDOM« to select the function.
2
– Display: »RANDOM«.
– The tracks on the CD are played back in random order.
To quit this function, press »RANDOM«.
3
– Display: »RANDOM« disappears.
– The tracks are played back in numerical order.
5a « or » s 6 « and hold it down until you
s 6 « are released, playback begins.
35