Timer Mode - Grundig MASQ RRCD 9100 PLL User Manual

0:00
wON
7:00
wON
0:00
wOFF
7:20
w
CD
FLAT
37 100.6
CH FM MHz
w
TUNER
VOL.
22
w
40

TIMER MODE

Your radio recorder has a switch-on timer, which turns the device on and off
at a pre-set time.
Setting the switch-on timer
Note:
The clock on the device must already be set. If, when setting the time, no
button is pushed for a period of longer than 10 seconds, the system will
end the process automatically. You then have to start again at the begin-
ning.
In standby mode, press and briefly hold down »TIMER«.
1
– Display: » « and »ON«, the hours display flashes.
w
Set the hours for the switch-on time with
2
3 Press »TIMER«.
– Display: » « and »ON«, the minutes display flashes.
w
4 Set the minutes for the switch-on time with
Press »TIMER«.
5
– Display: » « and »OFF«, the hours display flashes.
w
To enter the switch-off time, repeat steps
6
Press »TIMER«.
7
– Display: » «, »CD« flashes.
w
Select the tuner or CD input source using
8
Note:
If you select CD, make sure that a CD has been inserted.
If you select tuner, select the desired station position with
9
the device or with »
Press »TIMER«.
10
11 Set the desired volume using
Finish the settings with »TIMER«.
12
Deactivating the switch-on timer
To deactivate the switch-on timer, press »TIMER« briefly in stand-by
1
mode.
– Display: » « disappears.
w
– The switch-on timer for the next day is deactivated
or
Switch off the device while it is ready to switch on with »ON/OFF«.
– The switch-on timer remains activated for the next day.
________________________________________
»TUNING
»TUNING
2
»TUNING
5a « and » s 6 « on the remote control.
»VOLUME+ –
« on the device.
« on the device.
to 4.
« on the device.
»MEM
«.
« on