Radio Mode - Grundig RR 740 CD User Manual

!
98 1 .
5
FM
!
CH ((( MEMORY )))
00 I0 I.4
5
FM
!
CH
03 I0 I.4
5
FM
CH !
03 I0 I.4
5
FM

RADIO MODE

Radio reception
1 Press » STANDBY« to switch on the device.
– The indicator in the » STANDBY« button goes out.
2 Set the » CD TAPE
– The display shows the set frequency and waveband.
3 Select frequency band (FM, MW or LW) by pressing the» BAND«
button.
UP s s
4 Press »
– The display might show »98.1
Press the buttons briefly for manual/incremental tuning, or hold one of
MHz
them down to start an automatic search.
5 To switch off the device, press » STANDBY«.
– The indicator in the » STANDBY« button lights up.
Storing radio stations
You can store up to 40 stations (20 x FM, 10 x MW and 10 x LW) as
presets.
1 Tune into the station by pressing »
– Display: e.g. »00 101.4
2 Press » PROG.«.
MHz
– Display: »00 101.4
3 Press » MEM
– Display: e.g. »03 101.4
Note:
MHz
Select the number which you want to assign to the station within five
seconds, otherwise the function will be automatically ended without
storing the station.
With the RR 770 CD stations can also be selected and stored using the
remote control. To do this, use
and »MEM
4 Press » PROG.« to store the station to preset number 03.
– Display: e.g. »03 101.4
MHz
_________________________________________
RADIO« switch to » RADIO«.
§
« and » DOWN« to tune into the desired station.
«; and »
5
UP s s
«.
5
« and MEMORY flashes.
5
« or » MEM « to select the required station number.
«.
5
the»F.F./UP s s
« buttons.
«.
5
« for an FM stereo station.
!
« or » § DOWN« .
«, »REV./DOWN § «
25