Repeating The Current Track; Searching For A Passage Within A Track - Grundig RR 640 CD User Manual

CD MODE
Selecting a different track
1

Repeating the current track

1
0 2
2
Repeating the whole CD
1
2

Searching for a passage within a track

1
Random track playback
(RR 670 CD with remote control only)
1
I 2
2
r r
_____________________________________________
During playback, keep pressing
the number of the desired track appears in the display.
– Playback of the selected track starts automatically.
Press »REPEAT« during playback.
– Both LEDs light up and the track is repeated.
To end this function, press
During playback, press »REPEAT« twice.
– Both LEDs light up and the CD is repeated.
To end this function, press
Note:
With the RR 670 CD, the current track and the whole CD can also be
repeated using the remote control. To do this, use the »MODE« button.
During playback, press
down until you find the desired passage.
– When you let go of the
playback will begin at that point.
Note:
During the search the volume is reduced.
Press »MODE« on the remote control three times during playback.
– The display switches between the track number and an alternating
symbol. The tracks on the CD are played back in random order.
To end the function press »
Alternatively, press »MODE« on the remote control. In this case the
tracks will be played back in the original order.
Note:
You cannot select this function if the tracks are being played
back in a set sequence from the memory.
»F-SKIP s s
« or
»REPEAT « twice. The left LED goes out.
»REPEAT « again. The left LED goes out.
»F-SKIP s s »R-SKIP §
« or
»F-SKIP s s »R-SKIP §
« or
STOP «, and playback is halted.
»R-SKIP §
« until
« and hold it
« button,
27