Connecting Network And Power Source - Polycom SoundPoint IP 550 User Manual

Connecting Network and Power Source

You have two options for network and power source connections. Your
system administrator will advise you on which one to use.
You can use one of the following methods:
• AC power
• Power over Ethernet (PoE)
AC Power
To connect the AC power:
Connect the supplied network cable between the LAN jack on the phone
1.
and the LAN port on the wall or hub/switch device port.
Connect the DC plug on the power adapter to the DC 24V jack marked on
2.
the SoundPoint IP 550 phone or DC48V jack marked on the SoundPoint
IP 560 phone.
Getting Started with Your Phone
1 - 4