Connecting Network And Power Source - Polycom SoundPoint IP 670 User Manual

Connecting Network and Power Source

• Connecting Network and Power Source
• Connecting the Handset and Optional Headset
• Attaching the Base
If your phone is already assembled, go directly to
page 1-9.
You have two options for network and power source connections. Your
system administrator will advise you on which one to use.
You can use one of the following methods:
• AC power
• Power over Ethernet (PoE)
AC Power
To connect the AC power:
Connect the supplied network cable between the LAN jack on the phone
1.
and the LAN port on the wall or hub/switch device port.
Connect DC plug from the power adapter to "48v" marked jack on the
2.
phone.
Connect the country-specific AC cord to the power adapter.
3.
Getting Started with Your Phone
Features of Your Phone on
1 - 4