Splitting Conference Calls; Ending Conference Calls; Using Conference Bridges - Polycom SoundPoint IP 550 User Manual

Splitting Conference Calls

Ending Conference Calls

Using Conference Bridges

Repeat steps 5 to 7 until you have added all intended parties.
8.
To split a conference call:
>>
From the Active Conference page, press the More soft key, and then the
Split soft key to split the conference.
All calls are split into individual calls and put on hold.
To end a conference call:
>>
From the Active Conference page, press the EndCall soft key or hang up.
The other parties will continue to be connected.
A key business tool, the conference bridge allows users with an extension and
voicemail passwords to schedule and manage conference calls.
Basic functionality includes the ability to create and log into conference
bridges. There are also administrator modes that allow calling out and
dropping parties from the bridge.
Conference bridge supports up to 20 connected callers. An unlimited number
of conference bridges can be in session at the same time.
To call into a conference bridge:
Internal:
Press the ConfServ softkey.
1.
Follow the Conference Bridge voice prompts.
2.
External:
Call direct to DID to Conference Bridge (only if a DID is assigned to
1.
Conference Bridge).
Using the Features of Your Phone
3 - 11