Enabling Auxiliary Audio Components - Polycom SoundStation IP 7000 User Manual

User Guide for the Polycom SoundStation IP 7000 Phone
Note
2 - 12
The Bass EQ screen displays.
3. Press the Up or Down soft keys to adjust the treble or bass EQ, and then
press Select.
4. Press to return to the idle screen.

Enabling Auxiliary Audio Components

Before you can use the auxiliary audio components that you connect to the
Multi-Interface Module (wireless microphones, speakers, as well as recording
devices and computers to record phone calls), you must enable them. You
enable the components from the Auxiliary Audio menu.
You do not have to enable audio from a mobile phone or from a computer calling
application. This audio is automatically enabled when you connect the
Mobile Phone Cable or the Computer Calling Cable to the 2.5mm audio connector
on your conference phone.
For information on connecting auxiliary audio components to the conference
phone or Multi-Interface Module, see the Setup Guide for the Polycom
SoundStation IP 7000 Phone, available at
www.polycom.com/voicedocumentation.