Print Settings - Lexmark X790 series User Manual

Understanding printer menus
Menu item
Negative Image
Off
On
Shadow Detail
‑4 to 4
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4

Print Settings

Copies
1–999
Paper Source
Tray [x]
Manual Paper
MP Feeder
Manual Envelope
Color
Color
Black Only
Collate
On (1,2,1,2,1,2)
Off (1,1,1,2,2,2)
Sides (Duplex)
1 sided
2 sided
Staple
Off
On
Description
Creates a negative image of the original document
Note: Off is the factory default setting.
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Specifies whether or not to fix slight skew on the scanned image
Note: Off is the factory default setting
Specifies whether the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the amount of sharpness on a scanned image
Note: 3 is the factory default setting.
Enables the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Sets a default paper source for all print jobs
Note: Tray 1 is the factory default setting.
Generates color print jobs output
Note: Color is the factory default setting.
Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.
Specifies whether prints are on one side or on both sides of the page
Note: 1 sided is the factory default setting.
Specifies whether prints are stapled
Notes:
•
Off is the factory default setting.
•
This menu appears only when a stapler is installed.
212