Faxing; Getting The Printer Ready To Fax - Lexmark X790 series User Manual

Faxing

Faxing
Note: Fax capabilities may not be available on all printer models.
ADF
Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or

Getting the printer ready to fax

The following connection methods may not be applicable in all countries or regions.
Note: During the initial printer setup, deselect Fax and any other function you plan to set up later, and then touch
Continue. The indicator light may blink red if the fax function is enabled and not fully set up.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Initial fax setup
Scanner glass
photos), transparencies, photo paper, or thin media (such as magazine
clippings).
115